Solution Technologies, Inc..

Call 1-800-731-3038

One-Stop Shopping for Construction Estimators

 These pre-packaged, "bundled" systems give you everything you need!

U.S. Sales Only!

    ■    Package # 1:   For non-computer users, All Trades, doing basic Square / Linear footage take-offs.

    ■    Package # 2:   For computer users, All Trades, doing detailed Architectural / Structural take-offs.

    ■    Package # 3:   For computer users doing Earthwork take-offs.  (Also for GC's)           New!  On-Screen for CD's and PDF's

    ■    Package # 4:   For computer users, Earthwork take-offs, Advanced*.

    ■    Package # 5:   For computer users, Architectural & Earthwork.   (Also for General Contractors / CM)

    ■    Package # 6:   For computer users, Architectural & Earthwork, Advanced*.

    ■    Package # 7:   For Estimators who need to take-off standard blueprints and also do

                                 "On-screen" electronic take-offs from CD's, PDF's and downloaded drawings.   

                 *  Includes Trenching & Underground Utilities, Soil strata analysis, CAD Import, GPS Machine Control

Blueprint Take-off, With No Computer Needed:

If you don't want the hassle and expense of using a computer, or if you're looking for a very simple take-off device to plug quantities directly into your Excel spreadsheets, this is the right package for you!  For estimators in all trades, doing basic square footage and linear footage take-offs.   All CSI Divisions 2 - 16, except earthwork. The Quik-Ruler also works directly with your Excel sheets when hooked up to your PC!  Very easy to use and extremely durable.  You'll speed up your take-offs by 50 to 90%.

For "Quik-Ruler Pictorial" showing SF / LF take-off,  Please click here

For "Quik-Ruler" Video Demonstration showing SF / LF take-off,  Please click here

Package # 1 includes:

                                         (See Options Below for Sizes / Hard Board)

"Roll-Up III" Digitizer with Quik-Ruler Display                              Quik-Ruler Display Box with

 Box and optional Carrying  Case (not included)                      Pen Stylus and Measuring Menu

Blueprint Take-off, CSI Divisions 2-16, for computer users:

For estimators doing architectural or structural take-offs who'd like to see an on-screen visual display while making measurements, we recommend the following.  Roctek's "WinScale" software draws, prints and stores a picture of each item measured.  Package # 2 will also work directly with your current Excel, Lotus, or Quattro spreadsheets.  Requires a standard Windows PC, Pentium II or better, with color monitor and a serial or USB port.   Please note:  For estimators who prefer a basic, simpler package at a bargain price, Roctek also offers the "Prestto" take-off program.  Package #2, Prestto version.

Package # 2 includes:

        ■     Roctek "WinScale" Architectural Take-off Software

      ■    GTCO "Roll-Up III" Digitizer, 30" by 36" measuring area        (see options below)

Earthwork Cut & Fill / Structural Take-off, for computer users:

If you need to do earthwork cut & fill calculations, we recommend the following.  This system will save you a huge amount of time, and provide you with very accurate earthwork quantity surveys.  WinEx can also be used for take-offs in all scopes of work, CSI Divisions 2 -16.   Package # 3 will work directly with your current Excel, Lotus, or any other Windows program.  Requires a standard Windows PC, Pentium II or better, with color monitor and a serial or USB port.

Package # 3 includes:

        ■     Roctek "WinEx" Earthwork Take-off Software

      ■    GTCO "Roll-Up III" Digitizer, 30" by 36" measuring area            (see options below)

Earthwork Take-off System, Portable, 30" by 36"

Includes:  Roctek "WinEx" Earthwork Digitizer Software, GTCO Roll-Up III Digitizer 30" by 36", Cabling (USB), Wintab Driver, Choice of Pointing Device, Instruction Manual with Tutorial, On-Line Help File, 4 hours of "Web Classroom" training.

       GTCO "Roll-Up III" Digitizer, 30" by 36"                          Roctek "WinEx" Earthwork Software

                 (Various sizes shown)

Earthwork Take-off (Advanced), for computer users:

Designed specifically for the excavating contractor, Roctek's "WinEx Pro" provides even greater power.  WinEx Pro provides detailed trenching and piping take-offs for underground utility work.  In addition, WinEx Pro allows for strata calculations, with up to 20 strata layers, each with independent swell and ton conversion factors.  Designed specifically for the excavating contractor, Roctek's WinEx Pro provides even greater power, with Underground Utilities, Soil / Strata Analysis, CAD Import, GPS Machine Control. Also allows input of topos and sub-grade reqions directly from your PC screen, without paper plans!   Package # 4 will also work directly with your current Excel, Lotus, or any other Windows program.  Requires a standard Windows PC, Pentium II or better, with color monitor and a serial or USB port.

Package # 4 includes:

        ■     Roctek "WinEx Pro" Earthwork Take-off Software

      ■    GTCO "Roll-Up III" Digitizer, 30" by 36" measuring area            (see options below)

Architectural & Earthwork Take-off, for computer users:

If you need to do both architectural take-offs and earthwork cut & fill calculations with underground utilities and boring log / soil strata analysis,  we recommend the following "combo" system.  This system will save you a huge amount of time, and provide you with quick, accurate architectural take-offs and earthwork quantity surveys.  Package # 5 will also work directly with your current Excel, Lotus, or any other Windows program.  Requires a standard Windows PC, Pentium II or better, with color monitor and a serial or USB port.

Please note:  WinScale / WinEx "Software Bundle" is sold for use of both programs on one (1) computer.  Programs may not be separated for use on more than one computer.

Package # 5 includes:

        ■     Roctek "WinEx" Earthwork Take-off Software

      ■    Roctek "WinScale" Architectural Take-off Software

      ■    GTCO "Roll-Up III" Digitizer, 30" by 36" measuring area          (see options below)

Architectural & Earthwork Take-off (Advanced), for computer users:

If you need to do both architectural take-offs and earthwork cut & fill calculations with underground utilities and boring log / soil strata analysis,  we recommend the following "combo" system.  This system will save you a huge amount of time, and provide you with quick, accurate architectural take-offs and earthwork quantity surveys.  Package # 6 will also work directly with your current Excel, Lotus, or any other Windows program.  Requires a standard Windows PC, Pentium II or better, with color monitor and a serial or USB port.

Please note:  WinScale / WinEx "Software Bundle" is sold for use of both programs on one (1) computer.  Programs may not be separated for use on more than one computer.

Package # 6 includes:

        ■     Roctek "WinEx Pro" Earthwork Take-off Software

      ■    Roctek "WinScale" Architectural Take-off Software

      ■    GTCO "Roll-Up III" Digitizer, 30" by 36" measuring area          (see options below)

Blueprint and CD Take-off, CSI Divisions 2-16, for Computer users:

For estimators doing architectural or structural take-offs who need to take-off standard blueprints and also do "On-screen" take-offs from CD's and downloaded drawings, we recommend the following.  Roctek's "WinScale" software draws, prints and stores a picture of each item measured, from standard blueprints using a digitizer. 
"SOFTake-off" is designed for doing "On-Screen" measurements from CD's and downloaded e-drawings.  Package # 7 will also work directly with your current Excel, Lotus, or Quattro spreadsheets.  Requires a standard Windows PC, Pentium II or better, with color monitor and a serial or USB port. 

Please note:  For estimators who prefer a basic, simpler package at a bargain price, Roctek also offers the "Prestto" take-off program.  Click here for the Package 7,"Prestto Version" version.   Save $.

Please note:  WinScale / Soft Take-off "Software Bundle" is sold for use of both programs on one (1) computer.  Programs may not be separated for use on more than one computer.

Package # 7 includes:

        ■     Roctek "WinScale" Architectural Take-off Software

      ■    Roctek "SOFTake-off" On-Screen Take-off Software

      ■    GTCO "Roll-Up III" Digitizer, 30" by 36" measuring area          (see options below)