Solution Technologies, Inc.

Call 1-800-731-3038
 

Dakota Pedestals / Digitizer Tables

                                         

          XJ-5A                              XJ-1000A                               XJ-1500A                       Tilting Angles

 

International Shipping Available!

Compatible with All Large-format Digitizers

 

Dakota Series Pedestals are compatible with most all major digitizer brands.  Computer monitors and printers are accommodated by Dakota's heavy-duty, articulated accessory arms.

 

"Start Small, Add later"

 

Three Configurations Are Available:

 

XJ-5A Dakota Pedestal:  Basic table with smooth turning crank with precision rack & pinion adjusts with gas spring table height from 28.5 to 44.5 inches; tilt angles from 0 to near 90 degrees;  includes Levelers or optional casters for mobility.  See dimensional info and diagram below.   Weight:  70 lbs.  (4 Caster set recommended).

 

Buy On-Line

Dakota XJ-5A Digitizer Stand, shown with GTCO "Super L-VI"

                                                                                     (GTCO Super L-VI Board Digitizer and Plans Hold Down not included).                                                                   

 

XJ-1000A Dakota Workstation:  Includes X5-5A;  smooth turning crank adjusts desktop and digitizer workstations; single monitor arm and keyboard swivels 180 degrees to easily adjust to your needs; sliding monitor arm supports 14 to 27 inch monitors; adjustable computer shelf;  small footprint.  Weight:  138 lbs.   (6 Caster set recommended).

 

Buy On-Line

 

  Dakota XJ-1000A Digitizer Stand, with single monitor arm.

                                                                                        Shown with GTCO "Super L-VI" Hard Board Digitizer (not included).

 

XJ-1500A Dakota Workstation:  Includes XJ-1000A; all workstations are modular; includes second monitor arm or printer arm.  Weight:  168 lbs.   (6 Caster set recommended).

 

Buy On-Line

                                                                                 Dakota XJ-1500A DigitizerStand,  with dual monitor / printer

                                                                                 arms; with  GTCO "Super L-VI"  Board Digitizer (not included).

                                                  

XJ-1500A "Top of the Line",  Includes:

 

XJ-1000A Pedestal

Smooth turning crank adjusts desktop and digitizer workstations
Single monitor arm and keyboard swivels 180 degrees to easily adjust to your needs
Sliding monitor arm supports 14 to 27 inch monitors
Adjustable computer shelf
Small footprint - 10.5sg'
Includes second monitor arm or printer arm 

   Click for Dakota Pedestal Spec Sheet (PDF format)

    PDF      

                                          

 

                Buy XJ-5A On-Line                                               Dakota XJ-5A Tilting Angles

Dimensions for Dakota XJ-1000A Pedestal, with sliding Monitor Arm:

Buy XJ-1000 On-Line

Dakota Table Accessories:   

 

XJ-C1              Computer Shelf for Pedestal..................$ 169.00 

XJ-PHD           Plans Hold Down.................................$ 159.00     Click for picture

XJ-PHD-C       Plans Hold Down for Large Boards......$ 159.00     Click for picture

XJ-L-C4           Four (4) Caster Set, XJ5/1000.............$   59.00 

XJ-L-C6           Six (6) Caster Set, XJ-1500A..............$   79.00  

XJ-TT3648      Table Top for Roll-Up Digitizer.............$ 269.00  

XJ-TT3036      Table Top for Roll-Up Digitizer.............$ 259.00     

 

 

 

Return to previous page

 

  Made in the U.S.A.! 

 

Dakota Pedestals are manufactured in nearby Delaware. These pedestals are very high quality, "industrial-strength" digitizer tables which provide a comfortable and extremely durable workspace.

 

Thousands of Dakota Pedestals are in use worldwide by architectural, engineering, and construction professionals in all trades and disciplines. 

 

 

  Please note:

 

Due to the weight of the pedestal's MIG welded 11-14 steel gauge frame members, (when we say these tables are "heavy-duty", we're not kidding!)  we highly recommend the optional 4-caster and rolling 6-caster sets.  

 

_____________________

 

 

Hot Product Alert!

 

Roctek "SOFT Takeoff"

 

Electronic Takeoff for CD's , PDF's and e-mailed drawings

 

Roctek has now released "Soft Take-off".  Use your PC mouse instead of a scale ruler and take instant, accurate measurements off CD's and downloaded drawings / PDF's -- electronically!

 

Square / Linear footage, Counts.  Take measurements right off your PC screen.  Cut your costs and save time and money!

 

_____________________

 

 

 New Release!

 

"e-WinEx Pro" On Screen PDF take-off for Earthwork -- no Digitizer!  Do cut & fill take-offs right from your PC screen!

 

■ Includes new "DXF

   Inporter" function

   to import CAD files

   directly from

   engineer's designs.

■ Grid Staking Map:

   High-resolution

   staking diagrams

■ Detailed Site

   Report:

   Provides 3 separate

   reports showing

   everything you need

   to know - Cut, Fill,

   Import, Export,

   Suitable and

   Unsuitable materials,

   and areas

■ Automatic

   Elevation

   Marking:

   Automatically place

   contour/spot

   elevations on screen

   with font, size, type

   and color controls.

■ Enhanced Work

   Regions:  

   The ability to handle

   unconnected areas

   and voids;  Surface

   area calculations for

   work regions.

 

__________________

 

New  Release!   Take-off for CD's and PDF files -- no Digitizer!   Do take-offs right from your PC screen!

 

"Soft Take-off"

 

■  Paperless take-offs for architectural and structural-- CSI Divisions 2 -16.

__________________

 

"Super L-VI" Hard Board Digitizer
 

GTCO CalComp announced the release of their new Super L VI line of large-format digitizers featuring native USB support for simplified connectivity. Available immediately, the "Super L-VI" is designed to allow more versatility and robust functionality than ever!

 

 

 

 

[ Home ] [ Products ] [ On-Line Demonstrations ] [ Video Presentations ] [ Request for Information ] [ Ready-To-Order Systems ] [ ON-LINE STORE ]

 

Solution Technologies, Inc.

734 Hollow Road

Oella, Md.  21043      USA

1-800-731-3038
Copyright © 2010      Solution Technologies, Inc.